Most friends who do communication base station operation and maintenance and engineering procurement have encountered this kind
of headache: AC equipment such as monitoring and transmission in the base station will be shut down as soon as the mains supply is in-
terrupted, and the 24V battery pack that comes with the base station cannot directly supply power to the AC equipment. A separate UPS
takes up cabinet space, and the cost is much higher. Especially in remote outdoor sites, the temperature difference between winter and
summer is large, and the dust and humidity are heavy. It won't take long for ordinary civil inverters to break down, and it takes time and
effort to run back and forth for on-site maintenance, which also delays the operation and maintenance progress.

Many people think that the inverter is a simple voltage conversion device. Just choose a device with similar power. When it is really used
in the field, it is found that either the equipment is disconnected in time or the outdoor environment is frequently damaged, which adds
more trouble. We have been deeply involved in the field of industrial power supply for many years, and have provided power supply for
hundreds of communication base stations and outdoor monitoring stations. After contact, we found that choosing the right 24V inverter
to adapt to the scene can not only control the cost, but also greatly reduce the pressure of daily operation and maintenance.
When choosing an inverter for a base station scene, it must first fit the power distribution system at the scene. The backup batteries of
mainstream base stations in China are all 24V DC system, so the special models corresponding to 24V DC input and 230V AC output are
directly selected, which can be used directly by connecting the batteries without additional transformation of distribution lines, and the
installation and debugging can save a lot of things. Like our 2KVA rack communication inverter, it is a standard 24V DC input, which pe-
rfectly adapts to the original battery pack of the base station and can be deployed quickly without additional wiring.
The continuity and stability of power supply are the core requirements. The transmission and monitoring equipment of the base station
cannot be powered off casually, and the inverter must support the seamless automatic switching between the mains bypass and the in-
verter mode. When the commercial power is normal, it bypasses to supply power to the load, and at the same time, it intelligently floats
and maintains the battery. When the commercial power is abnormal or power is cut off, it switches to inverter power supply in milliseco-
nds, and the equipment will not stop and disconnect the network in the whole process, which fully adapts to the unattended base station
operation and maintenance requirements. In addition, the model with pure sine wave output must be selected, and the output waveform
is consistent with the commercial power, which will not interfere with the operation of precision communication equipment and will not
damage the components of the equipment, so it is more reliable for long-term use.
Environmental adaptability can't be ignored. Outdoor base stations have large temperature difference and heavy dust and moisture. Ord-
inary civil-grade inverters can't carry this environment, and components are prone to aging and heat dissipation failures. Industrial inverter
generally adopts metal body, with intelligent temperature control and heat dissipation, which supports wide temperature environment
operation, and also has a full set of protection mechanisms such as overvoltage, undervoltage, overload and short circuit. Even if the field
power grid fluctuates greatly, it can run stably and reduce the frequency of on-site maintenance. Our 2KVA model also supports RS485
communication interface, which can be connected to the centralized monitoring system of the base station, so that we can check the runn-
ing status and receive fault alarms in real time remotely, and we can master the equipment situation without running to the site.
If you need type selection and transformation, you can consult Baoweite for the scheme. Thank you for browsing. You can collect official
website of Shenzhen Baoweite Power Supply Co., Ltd.